 | Model Info |  |  |
The WR2 Series has double heat recovery potential, making this system very economical. Not only does it produce heat recovery from the indoor units on the same 2-pipe refrigerant circuit, it also produces heat recovery via the water circuit between heat source units. This series has all the benefits of the R2 Series with water cooled condensing units, using a single inverter compressor.
 |
| Dimensions | | |
 | PQRY-P200YHM-A |  |  |
| Capacity (kW): | |
| Heating (Nominal) | 25.0 |
| Cooling (Nominal) | 22.4 |
| Power Input (kW) Heating (Nominal) | 4.12 |
| Power Input (kW) Cooling (Nominal) | 3.96 |
| Max No. of Connectable Indoor Units | 20 |
| Noise (dBA) | 47 |
| Width - mm | 880 |
| Depth - mm | 510 |
| Height - mm | 1160 |
| Weight - kg | 186 |
| Electrical Supply | 380-415v, 50Hz |
| Phase | 3 |
| Mains Cable No. Cores | 4 + earth |
| Starting Current (A) | 8 |
| Running Current (A) - Heating | 6.3 |
| Running Current (A) - Cooling | 3.1 |
| Fuse Rating (BS88) - HRC (A) | 20 |
| Piping Restrictions | | |
| Total Piping Length (m) | 550 |
| Furthest Piping Length (m) | 165 |
| Between Outdoor and BC Controller (Master) - Length (m) | 110 |
| Length Between Indoor and BC Controller (Master / Slave) - Length (m) | 60 |
| Between Indoor and Outdoor Units - Height (m) | 50 |
| Between Indoor and Indoor Units - Height (m) | 15 |
| Between Indoor and BC Controller (Master/Slave) - Height (m) | 15 |
